SolidynePro SolidyneLider

 

General Information

How to use MX2100

You can hear the MX2100 with VQR restoration or Skype

VIDEO #1 : the MX2100 mini console (English closed captions)

VIDEO #2: Using smart phone and Skype (English spoken)

PDF Brochure for printing

   Specifications & Block Diagram

Operation MANUAL


           Imprimir

           Comienzo

MX 2100

 

Untitled Document

Technical Specifications MX 2100


 
Inputs

4 Microphone inputs; 3 external dynamic MIC and one internal condenser MIC.
One line input for cassete, DAT or digital recorder

 
MIC input level
From -20 to -75 dBu.
Non clipping MIC preamplifier at any level
 
Audio output
Balanced audio output 0 dBu / 10 Kohms
 
Hybrid Outputs
2 outputs with internal Hybrid. One for phone line (POT) and one for cellular phone
 
Headset outputs
3 outputs for headsets. Z= 8 to 600 ohms
With separate amplifier with level control
 
Frequency Response
Flat 20-15.000 Hz plus an anti-pop filter with -6 dB @ 30 Hz and Low pass filter -3 dB @ 12 Khz
 
THD Distortion
Less than 0,4 % @ 1 Khz
 
Noise
70 dBA Signal/Noise ratio with -40 dBu MIC level
 
Audio Compressor
16 dB action with 2 LED indication.
10 ms attack time and 200 ms recovery
 
Fast Limiter
Peak limiter after compressor stage to avoid digital saturation of cellular phones.
 
Electronic Technology
Full use of advanced CMOS amplifiers with very low power consumption , for long battery duration
 
Cellular connection

Full wireless Bluetooth connection with 16 bits converter.
Red and Green indication of status
Backup of cellular link: RJ11 open cable to be connected to the Hands-free kit of the second cellular phone.

 
DTMF Dialer
Internal dialer for making call to Studios. The console is connected to RJ11 like a regular phone set.
 
Battery charger
The console includes a multivoltage 90 V to 240 V, USB battery charger, with automatic voltage selection
 
Battery duration
MX 2100 works continously during 16 hours
Can be charged in one night
It uses a standard low cost 3,6 V battery used for wireless phone sets
 
Dimensions and Weight
Dimensions: 121 mm x 129mm x 37 mm
Weight: 600 gr (0,6 Kg)

 

 

 

 

Click here for enlarge this diagram and click again over the enlarged image